Qubino Z-Wave Shutter Controller
The Qubino Shutter is the world's smallest Z-Wave module able to control the motors of blinds, rollers, shades and Venetian blinds.
- Z-Wave Plus certified
- Supports the connection of a temperature sensor
- Requires 3-wire (including neutral) installation
- Can measure the power consumption of connected device
The Qubino Shutter is a Z-Wave Plus (500 series) controller for blind, roller and shade motors. It is designed to fit into an existing switch and enables you to wirelessly control blind motors using a Z-Wave enabled (921.42 MHz in AUS/NZ) controller and reports the motors actual power (Watts) and total power consumption (kWh). This device also supports precise positioning for motors equipped with mechanical or electronic switches.
The Qubino Shutter allows the connection of a temperature sensor which can report the local temperature to your Z-Wave gateway allowing it to better meet your heating/cooling needs.
Qubino is manufactured by GOAP in Europe
|RF Protocol||Z‐Wave Plus (500 series chip)|
|RF Frequency||921.42Mhz ‐ AU/NZ approved RF for Z‐wave|
|Z‐Wave device type||Z-Wave binary switch, routing slave|
|Power||230 VAC ± 10%|
|Load||2 x 920W (4A resistive @ 230V AC)|
|Power Consumption||< 0.7W|
|Operation Range||Up to 30m indoors (with no obstacles)|
|Application||Indoor use only|
|Operation temperature||10 ~ 40 °C|
|Storage temperature||‐10 ~ 60 °C|
|Dimensions||41.8mm x 36.8mm x 16.9mm|
QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.
We Also Recommend