FIBARO Z-Wave Single Switch 2

Fibaro

$114⁰⁰
Save $5

Product Details

The Fibaro Z-Wave Single Switch 2 is a wireless Z-Wave module which can control appliances or lighting up to a maximum load of 2.0kW.

Control the ON-OFF function of a circuit remotely or using a wall switch
Compatible with all Z-Wave networks
Acts as a repeater expanding your Z-Wave network
Wide range of compatibility with existing light fittings and does NOT require expensive cabling
control loads up to 2kW (8A)

The main differences in the FGS-213 are:

Z-Wave Plus certification
Has power monitoring
230V powered only (this is the same as the FGS-212)
No dry contacts - this is important. It means that the new FGS-213 cannot be used to control low voltage systems such as garden lights and irrigation, or where you want a pure volt-free switch such as alarm panels and garage door controls. If you need device with dry contacts please see zConnect Z-Wave Garage Door Opener or FIBARO Z-Wave Single Switch or DHS Z-Wave Single Switch.

The Fibaro Z-Wave Single Switch 2 also features a secondary switch input which allows it to directly control other associated Z-Wave devices. This means that by turning the switch ON/OFF you can also turn other associated devices ON/OFF even if they are not physically connected to the same Fibaro module. It also enables you to control the local load as part of 2-way and multi-way lighting circuits.

Technical Specifications

RF Protocol	Z‐Wave
RF Frequency	921.42Mhz ‐ AU/NZ approved RF for Z‐wave
Z‐Wave device type	Z-Wave Switch, Routing Slave
Power	110-230V ± 10% 50/60 Hz
Operation Range	Up to 20m indoors with no obstacles
Application	Indoor use only, up to 2.0kW resistive load, 8A
Operation temperature	0 ~ 55 °C
Storage temperature	‐10 ~ 80 °C
Weight	50g
Housing	ABS
Compliance	EN 55015, EN 60669-2-1
Regulatory Compliance Mark	N5496
Dimensions	(LxWxH) 42mm x 37mm x 17mm

Manuals and Downloads

Fibaro Z-Wave Single Switch 2 Manual