KAS Z-wave Keypad Lock
KAS Z-Wave Keypad Lock (Left) offers the flexible versatility of a wireless and keyless locking solution. The lock is integrated with the popular Z-Wave network protocol which can be integrated into automation building solutions. It features a Master pin code, low battery warning, emergency key override and many more safety features for your convenience.
Have the ability to change the Master code
Program up to 10 different user codes
Remote code change
Integrated into the Z-Wave device the automation management software has the ability to change the code remotely without being at the lock
Z-Wave networking enabled
The wireless lock is a certified Z-Wave device which can be configured to any Z-Wave certified home automation or building automation system
From the software interface the door can be unlocked remotely
The keypad does not have mechanical buttons which means your secret pin cannot be traced.
includes Mechanical key barrel for manual override
Low battery warning
The lock will emit a tone notifying the owner to replace the batteries; normal battery use is 12-16 months
Electronic lock body front and rear with 60/70mm variable backset tubular latch
User guide - including manual operation and Z-Wave device commands
Mechanical overkey keys - in case of power failure
Screw kit and installation instructions - all hardware, striker plate, phillips screws
Please note: for remote unlocking and wireless connection, this device requires Z-Wave home controller with AU/NZ RF 241.42MHz. Available functions may depend on the compatibility of your home controller software.
|Product Name||KAS Z-wave Keypad Lock|
|Powered by||4xAA High quality alkaline - 8,000 normal uses without using Z-Wave chip. The length of battery life will decrease when using Z-Wave wireless option|
|Operation Range||Up to 30m indoor|
|Door thickness||32-50 mm|
|Radio frequency||921.42 MHz (AU/NZ Z-Wave)|
|Fire rated||Cannot be used on a fire door|
|Front/rear lock body||Die cast brushed stainless finish|
|Tubular latch||Zinc alloy 60/70 variable backset|
|Handle||Zinc alloy die cast stainless finish|
QUESTIONS & ANSWERSAsk a Question
Are you getting more of these in stock
Hi - availablity of these locks has been on and off for some time. We have no current ETA on when (or if) they will be available in Australian versions again.
We Also Recommend