3 Stage Digital Output Module
A solution that allows for Home Automation interface and direct wired control from the wall using a Rotary Switch or Potentiometer when coupled with a GOAP 0-10V Z-wave Module.
This Digital Output Module converts a 0-10V control signal to 3 x Volt free relay outputs. It's technology is microprocessor based which allows it to offer a 3 stage sequence, step, heat / cool or 12 stage binary control. The module offers time delay for sequence or step control and reverse sequence for step mode. Reverse Sequence allows simple changes between OFF-HIGH-MED-LOW and OFF-LOW-MED-HIGH control schemes.
It works with any 0-10V input and requires a 24VAC or 24VDC supply to run.
- Microprocessor based technology
- 12 stage binary control
- 3 Stage sequence, step or heat / cool control
- LED status indication
- Time delay and reverse sequence
- 24V AC or DC supply
- 3 x Relays Volt free 5A @ 240V AC inductive
These devices are not certified for use in Australia switching voltages exceeding 50VAC or 120VDC. If you need to switch mains voltage, consult your electrician regarding suitable external contactors.
3 Stage Digital Output Module - Datasheet
QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.
We Also Recommend