Cart 0

AEOTEC Z-Wave WallMote Quad

Aeon Labs

  • $9900

On any wall.

WallMote is the wall switch that you can install anywhere. Wirelessly.

Whatever the room, whatever the wall, WallMote is perfect. It is the wireless, Z-Wave wall switch that you can place anywhere, on any wall, with as little as double sided tape. Unpack it. Stick it. Charge it. Control is just a tap away.

Simple to install.

WallMote is the wall switch for anywhere because of it is simple to install. Mounting it requires just two steps.

Attach the mounting plate.

WallMote’s mounting plate affixes to any wall or surface using custom mounting tape. Peel. Stick. Done.

Attach WallMote.

WallMote is attractive. Literally. Simply place it in front of the mounting plate and it will magnetically attach.

Or anywhere.

It is great as the wall switch that you can place anywhere. But WallMote is also the wall switch that you can use anywhere.

Designed for simple recharging and portable use, WallMote’s magnetic mount means that you can simply pull it away from the wall it is mounted on whenever you need it somewhere else. WallMote. Coffee-table-Mote. Bedside-Mote. Anywhere-Mote.


Control on tap.

Control one Z-Wave device. Control many. And all with a single tap.

There is simplicity in tapping touch glass. smartphones proved it. There is power too. Each of WallMote’s buttons can be programmed to control one Z-Wave device or many. Meaning that a single tap on its smooth surface can change a single light, a whole room, or your whole home. Tap good morning. Tap good night. Tap all the moments in between.

Tap control.

WallMote does not just offer control on tap. Each button is touch sensitive, meaning you can access new commands and control scenes simply by holding your finger a little longer.


Slide control.

Press and hold. Swipe up. Swipe down. Tap. Through capacitive touch, each of these lets WallMote do something different. Dim lights on a whim. Open curtains to let in a little bit more light. Through the power of touch, WallMote does not just offer whole home control, it offers precise control on demand.


Wireless switch.
To be used anywhere in your home, WallMote and WallMote Quad need to be more than wireless. They need to be impressively wireless. Both switches offer a fine-tuned antenna capable of communicating over an open range of over 150 metres / 492 feet.

Secure switch.

Technology changes, now your wall switches change with it. WallMote and WallMote Quad are cutting-edge today and will be cutting-edge tomorrow. They are both capable of receiving wireless firmware updates via Z-Wave Plus so that they are always up to date.

Subtle switch.

Not just portable, but perfectly balanced. The minimalist design of both WallMote and WallMote Quad measures just 7.7cm wide and a slender 1.9cm deep (3.0 x 0.4 inches).

Simple recharging.

Battery powered but without the need to ever change a battery, WallMote and WallMote Quad are both powered by a rechargeable lithium battery designed for smartphones. It recharges just like a smartphone too via the provided micro USB cable.

Haptic feedback.

It is capable of controlling your whole home, so you may not even be present to see things change when you press WallMote’s touch glass. But you will feel the change. WallMote’s haptic engine confirms your every action via a click sensation.


Name: WallMote Quad

Model number: ZW130.

Dimensions: 76.8 x 76.8 x 10.9mm

Repeater: No

Beaming: No

Number of child nodes: 4

Number of buttons: 4

Press functions per Group Association: 


Press and Hold

Swipe up

Swipe down

Press functions per Scene use:


Press and Hold

Button Identification for scene use:

Button 1 Tap = Scene ID 1

Button 1 Press and hold = Scene ID 2

Button 2 Tap = Scene ID 3

Button 2 Press and hold = Scene ID 4

Button 3 Tap = Scene ID 5

Button 3 Press and hold = Scene ID 6

Button 4 Tap = Scene ID 7

Button 4 Press and hold = Scene ID 8

Control use: 

Scene Control 

Group Association

Power supply: Rechargeable lithium battery, 3.7 V, 640mAh. 

Battery Life: 3 months from full charge.

  • 150 times of presses per day
  • 20 times of sliding each day
  • 60 times of wake up reports per day
  • Does not include Wakeup Reports, disable Wakeup Reports to maximize battery use.

Battery charger input: 

Plug type: Micro USB port, 

Voltage: DC 5V±0.5V, 

Current: max 1A.

Operating temperature: 0°C to 40°C.

Operating humidity: 8% to 80%.

Z-Wave Repeater: No

Operating distance: 

Up to 394 feet outdoors.

Up to 120 metres outdoors.

Questions & Answers

Ask a Question
  • Wallmote simple recharging. How often will this device need charging?

    The answer to that depends on a number of factors - how often it's used, is haptic feedback enabled, how often the device is configured for wakeup or polled by your controller.

    The short answer is 3-6 months in 'normal' use scenarios is a realistic expectation.

    Recharging is via a USB connection, the Wallmote is held magnetically in its holder. Easy to remove and replace.

  • I have been testing a Wallmote Quad that I received 28 November. Although barely used, it has needed recharging twice in just those few weeks. I saw mention of a firmware upgrade but am not sure how to check which version the device has. What do you suggest?

    Hi, first step is make sure your Wakeup Interval and Polling Settings are large enough. You'll find these on the Settings tab in the device on your Vera.

    Wakeup interval and Polling should be at least 10800 (every 3 hours) or longer. 

    If that doesn't help, let us know. Firmware updates for the Aeotec devices require a USB Z-Stick and Windows PC to perform. The v1.07 firmware which references a battery drain fix has been out since June 2017, any of the AU devices should already have that version firmware as they only became available in September. I have a Quad at home using those Wakeup/Polling intervals and I've only charged it once since I got it in September.

We Also Recommend