DHS Z-Wave Dimmer
The Z-Wave In-Wall Dimmer Controller is an advanced Z-Wave controller perfect for remotely operating your existing light fittings. It allows you to turn your lights ON or OFF and to adjust their level of illumination with a dimming interval of up to 1%. It works with Z-Wave enabled controllers (AUS/NZ version) and can be controlled individually or as part of a group in a pre-configured Scene.
The Z-Wave In-Wall Dimmer Controller is designed to operate inside your wall socket and can be easily installed by a qualified electrician.
The controller is also compatible with many popular BELL PRESS type light fittings including Clipsal IMPRESS and SATURN wall switches.
This product integrates with all Australian certified (921.42MHz) Z-Wave controllers including:
- Vera 3/Lite
- Fibaro Home Center 2/Lite
- DHS Z-Wave Universal Remote Controller
- DHS Z-Wave Mini Remote Controller
Incandescent globes, High Voltage Halogens, Low Voltage Halogens with electronic transformers(Trailing Edge and Leading Edge)
CFL globes: Dimmable Philips Tornado CFL lamps and similar products.
LEDs: High performance, energy efficient Starburst LED downlight from Pierlite Australia and similar products.
This product must be installed by a qualified electrician.
Before engaging an electrician, check that they provide an electrical compliance certificate.
For warranty claim you have to provide an installation compliance certificate from your electrician.
Do not mix the load type as this will result in improper function of the dimmer. This will void the dimmer's warranty.The neutral wire is not required for the dimmer to function. Using it will void the dimmer's warranty.
|RF Protocol||Z‐Wave(Multi-Level Command Class)|
|RF Frequency||921.42Mhz ‐ AU/NZ approved RF for Z‐wave|
|Z‐wave device type||Z-Wave multiple level dimmer, routing slave|
AC 230/ 50Hz
|Operation Range||Up to 30m indoor when no obstacles|
||1% with safety minimum set up at 25%|
||Universal, compatible with electronic transformers (Trailing Edge and Leading Edge). Not compatible with iron core transformers.|
|Application||Indoor use only|
|Operation temperature||0 ~ 55 °C|
||300W / 75W|
|Storage temperature||‐10 ~ 80 °C|
|Compliance||AS/NZS 4268:2008, AS/NZS CISPR 15, IEC60669-2-1|
Regulatory Compliance Mark
||Incandescent globes, High Voltage Halogens, Low Voltage Halogens with electronic transformers Trailing Edge or Leading Edge type only.|
||(LxWxH) 45mm x 48mm x 18 mm|
Questions & Answers
Have a Question?
Be the first to ask a question about this.
We Also Recommend