DHS Z-Wave Double Switch
The Z-Wave DHS In-Wall Double Switch Controller is a wireless controller which can be a part of many whole-home automation solutions.
- Control the ON-OFF function of two independent circuits remotely or using a momentary / bell type switch
- Compatible with all Z-Wave networks
- Acts as a repeater expanding your Z-Wave network
- Wide range of compatibility with existing light fittings and does NOT require expensive cabling
|RF Protocol||Z‐Wave, MultiChannel Command Class|
|RF Frequency||921.42Mhz ‐ AU/NZ approved RF for Z‐wave|
|Z‐wave device type||Z-Wave Binary Switch, Routing Slave|
Manual Switch Compatibility
||BELL PRESS type only|
|Power||AC 240V / 50Hz|
|Operation Range||Up to 20m indoors with no obstacles|
|Application||Indoor use only|
|Operation temperature||0 ~ 55 °C|
|| 6A / 1440W each circuit
|Storage temperature||‐10 ~ 70 °C|
|Compliance||AS/NZS 4268:2008, AS/NZS CISPR 14.1, IEC60669-2-1|
Regulatory Compliance Mark
||(LxWxH) 48mm x 45mm x 18mm|
Questions & Answers
Have a Question?
Be the first to ask a question about this.
We Also Recommend