FIBARO Z-Wave Single Switch
The Fibaro Z-Wave Single Switch Controller is a wireless controller which can control appliances or lighting up to a maximum load of 3kW.
- Control the ON-OFF function of a circuit remotely or using a wall switch
- Compatible with all Z-Wave networks
- Acts as a repeater expanding your Z-Wave network
- Wide range of compatibility with existing light fittings and does NOT require expensive cabling
The Fibaro Z-Wave Single Switch Controller is a smart Z-Wave controller capable of remotely operating your existing light fittings. It works with Z-Wave enabled controllers (AUS/NZ version) and can be controlled individually or as part of a group in a pre-configured Scene.
The device is designed to operate inside your wall socket and can be easily installed by a qualified electrician.
This Fibaro Z-Wave Single Switch Controller requires 3-wire (including neutral) installation and works with an AC (110-230V) or DC (24-60V) power supply.
The controller is also compatible with many popular BELL PRESS type light fittings including Clipsal IMPRESS and SATURN wall switches.
The Fibaro Z-Wave Single Switch Controller also features a secondary switch input which allows it to directly control other associated Z-Wave devices. This means that by turning the switch ON/OFF you can also turn other associated devices ON/OFF even if they are not physically connected to the same Fibaro module. It also enables you to control the local load as part of 2-way and multi-way lighting circuits.
This product integrates with all Australian certified (921.42MHz) Z-Wave controllers including:
- Vera 3/Lite
- Raspberry PI with RaZberry Card
- Fibaro Home Controller 2/Lite
- DHS Z-Wave Universal Remote Controller
- DHS Z-Wave Mini Remote Controller
|RF Frequency||921.42Mhz ‐ AU/NZ approved RF for Z‐wave|
|Z‐Wave device type||Z-Wave Switch, Routing Slave|
|Power||110-230V ± 10% 50/60 Hz|
|Operation Range||Up to 15m indoors with no obstacles|
|Application||Indoor use only, up to 3kW resistive load|
|Operation temperature||0 ~ 55 °C|
|Storage temperature||‐10 ~ 80 °C|
|Compliance||EN 55015, EN 60669-2-1|
Regulatory Compliance Mark
||(LxWxH) 42mm x 37mm x 17mm|
Questions & Answers
Have a Question?
Be the first to ask a question about this.
We Also Recommend