Cart 0
LiveHouse Automation :DHS Z-Wave Multi-Sensor,DHS

DHS Z-Wave Multi-Sensor


  • $8500

Product Details

The DHS Z-Wave Multi-Sensor is a smart, battery-powered Motion/Temperature/Luminosity sensor. This device is capable of sending Z-Wave commands to any associated Z-Wave devices within its Z-Wave network when someone moves inside a room or the Temperature/Luminosity changes.

This sensor is perfect for controlling the lights in any household. You can set them to switch ON when someone enters the room at night-time but not daytime. The Luminosity sensor can also adjust the amount of lighting - both the number of lights turned on as well as their intensity - based on the degree of natural light in the room. 

The sensor reports its battery level as a percentage to the Z-Wave Gateway and has a red LED light which indicates when motion is detected.

This unit can be used to trigger security / warning applications within a Z-Wave network, activate lighting scenes and turn wireless switches ON/OFF.

Integrates with all Australian certified(921.42MHz) Z-Wave controllers including:

  • Vera 3
  • Vera Lite
  • DomotiGa
  • DHS Z-Wave Universal Remote Controller
RF Protocol Z‐Wave (Mulitlevel Command Class)
RF Frequency 921.42Mhz ‐ AU/NZ  approved RF for Z‐wave
Programmability Programmable delay time, sensitivity, lux, 
Z‐wave device type Z-Wave multiple level dimmer, routing slave
Operating Voltage 3V (2 AA - 1.5V Alkaline Batteries)
Status Indicator LED Light
Sensitivity Distance 4-7metres in a 120° angle from front of sensor
Operation Range Up to 30m without obstacles
Application Indoor use only
Operation temperature -5 ~ 55 °C
Storage temperature ‐10 ~ 80 °C
Weight 42g
Housing ABS, 62x62x44 mm
Compliance C-Tick N27640, EMC(Battery operated), EN 55015, EN 61547

    Questions & Answers

    Have a Question?

    Be the first to ask a question about this.

    Ask a Question

    We Also Recommend