Menu
Cart 0
LiveHouse Automation :FIBARO Z-Wave Smoke Sensor,Fibaro

FIBARO Z-Wave Smoke Sensor

Fibaro

  • $13500


Product Details

The Fibaro Smoke Sensor is probably the smallest wireless smoke sensor in the World. Advanced production technology allowed to significantly minimise the sensor components, making Fibaro sensor the most advanced device of that type available on the market, and our company the leader in the manufacture of wireless smoke sensors.

The Fibaro Smoke Sensor is a universal, optical Z-Wave smoke sensor. The device can be hard wired (12 or 24 VDC) or battery operated (battery life 3 years*). Smoke detection is signaled through siren and LED diode blinking. Additionally, the smoke sensor signal can be sent to an alarm system or fire alarm system hub, through a NC (normally closed) contact terminals. The optical sensor detects smoke at an early stage of fire, often before flames appear and temperature starts to rise significantly. Moreover the device has a built-in temperature sensor, which can also trigger the alarm once the specified temperatute threshold is exceeded. The Fibaro Smoke Sensor is designed to be placed on a wall or ceiling. LED indicator signals fire, operating mode and used to see if device is within the Z-Wave network. The smoke sensor is designed to operate in confined spaces, under normal conditions (lacking smoke, dust, condensed water vapor).

  • Compatible with any Z-Wave Controller.
  • May be connected to any alarm or fire prevention system by hard wiring NC output
  • Extremely easy installation - simply install it in location prone to fire.
  • Battery or VDC powered.
  • Built-in tamper switch.
  • Alarm is signaled by sound and LED diode.
  • Fire detection through air temperature measuring.
  • Can trigger alarm just by exceeding temperature threshold.
  • 3 levels of sensors sensitivity.
  • Automatic efficiency test performed every 5 seconds.
  • Built-in “black box” allows the device to report and record smoke and temperature readouts.
Product Name  SMOKE SENSOR FGSS-001 v2.3
Battery Type CR123A battery, 3.6 VDC
Operation Range 30m
   
Radio frequency 921.42 MHz (AU/NZ Z-Wave)
Power Consumption 0,4W
Operation temperature 0 - 50C*
Measured temperature range 0,5o C (within 0o C - 40o C range)
Temperature measuring accuracy 0,5 C
Housing ABS
Size (Diameter) 65 x 28 mm

 

FIBARO Z-Wave Smoke Sensor - Operating Manual

QUESTIONS & ANSWERS

Ask a Question
  • Is this to Australian standard or do you still need a normal smoke alarm

    This smoke sensor can be used only as an auxiliary detector detector linked to your home automation system. To fulfil Australian regulations you must have installed other fully certified (generally mains powered) primary smoke detectors.

    The Fibaro's are currently not available, please check out the Philio units


We Also Recommend