FIBARO Z-Wave Roller Shutter 2 Controller
The Fibaro Roller Shutter 2 is an advanced Z-Wave controller for automated roller blinds, awnings, venetian blinds, garage doors and gates. The module can control devices that are powered by an AC electric motor.
The Roller Shutter module features automatic calibration, so that you can precisely position the blind. It also includes a power metering feature to help you measure the power consumption.
The Fibaro Roller Shutter 2 has five modes that enable it to perfectly control any electric garage door, gate, roller blind, awning or venetian blind. This allows for correct configuration and operation of a device through a special interface icon (via the Fibaro HC2).
- Roller blinds with positioning
- Roller blinds without positioning
- Garage doors with positioning
- Garage doors without positioning
- Venetian blind
This product must be installed by a qualified electrician.
Before engaging an electrician, check that they provide a warranty and electrical compliance certificate.
For warranty claim you have to provide an installation compliance certificate from your electrician.
|RF Frequency||921.42Mhz ‐ AU/NZ approved RF for Z‐wave|
|Z‐wave device type||Z-Wave multiple level dimmer, routing slave|
|Power||110 - 230 V ±10% 50/60Hz|
|Operation Range||Up to 20m indoor when no obstacles|
|Application||Indoor use only|
|Operation temperature||0 ~ 55 °C|
|Motor Load max||up to 1kW|
|Storage temperature||‐10 ~ 80 °C|
|Compliance||C-Tick, EU standards EN 55022, EN 61000|
FIBARO Z-Wave Roller Shutter 2 Controller - User Manual
QUESTIONS & ANSWERSAsk a Question
Will this work with the Vera plus controller?
According to the Vera compatibility list, it's a supported device.
We Also Recommend