GOAP (QUBINO) Z-Wave Double Switch InWall

GOAP

$95⁰⁰

Description
Specifications
Manuals and Downloads

The GOAP Double Switch is Z-Wave module for switching on or off one or two electrical devices (e.g. light, fan, etc ...). The module can be controlled either through Z-wave network or through the wall switch manually.

This module is designed to be mounted behind a traditional wall switch. Module measures power consumption of load and supports connection of digital temperature sensor. It is designed to act as repeater in order to improve range and stability of Z-Wave network.

Supported switches

Module supports mono-stable switches (push button) and bi-stable switches. The module is factory set to operate with bi-stable switches.

Compatible with any Z-Wave Controller.
Dimensions (W x H x D) 41,8 x 36,8 x 15,4mm
Power monitoring accuracy P=5-50W, +/-3W; P˃50W, +/-3%;
Digital temperature sensor range (sensor must be ordered separately) -50 ~ 125°C
Support for the connection of digital temperature sensor (optional part)
2 binary inputs offer the option to connect additional devices such as sensors, switches and push buttons

Strengthens Z-Wave Connectivity

The smart relay module has been designed to work as a Z-Wave repeater, thereby providing you the flexibility to extend the range of your Z-Wave network.

The GOAP double switch is Z-Wave Plus Certified. Z-Wave Plus (5th Generation Z-Wave) offers a lot of new features including increased range, extended battery life and Over The Air upgrading (OTA).

Product Name	Flush 2 relay
Powered by	24V DC or 240V AC
Operation Range	30m
Max Load	2300W (230VAC)
Radio frequency	921.42 MHz (AU/NZ Z-Wave)
Power Consumption	0,4W
Operation temperature	-10 -+40 C*
Measured temperature range	0,5^o C (within 0^o C - 40^o C range) (optional sensor)
Temperature measuring accuracy	0,5 C
Housing	ABS
Dimensions (W x H x D)	41,8 x 36,8 x 15,4mm

GOAP (QUBINO) Z-Wave Double Switch InWall - User Manual

Videos / YouTube: Single switch

Flush 2 Relay - User Manual