GOAP (QUBINO) Z-Wave Tubular Motor Controller
The GOAP Z-Wave Tubular Motor Controller is the world's smallest Z-Wave module able to control the motors of blinds, rollers, shades and Venetian blinds.
- Z-Wave Plus certified
- Supports the connection of a temperature sensor
- Requires 3-wire (including neutral) installation
- Can measure the power consumption of connected device
The GOAP Z-Wave Tubular Motor Controller is a Z-Wave Plus (500 series) controller for blind, roller and shade motors. It is designed to fit into an existing switch and enables you to wirelessly control blind motors using a Z-Wave enabled (921.42 MHz in AUS/NZ) controller and reports the motors actual power (Watts) and total power consumption (kWh). This device also supports precise positioning for motors equipped with mechanical or electronic switches.
The GOAP Z-Wave Tubular Motor Controller allows the connection of a temperature sensor which can report the local temperature to your Z-Wave gateway allowing it to better meet your heating/cooling needs.
|RF Protocol||Z‐Wave Plus (500 series chip)|
|RF Frequency||921.42Mhz ‐ AU/NZ approved RF for Z‐wave|
|Z‐Wave device type||Z-Wave binary switch, routing slave|
|Power||230 VAC ± 10%|
|Load||2 x 920W (4A resistive @ 230V AC)|
|Power Consumption||< 0.7W|
|Operation Range||Up to 30m indoors (with no obstacles)|
|Application||Indoor use only|
|Operation temperature||10 ~ 40 °C|
|Storage temperature||‐10 ~ 60 °C|
|Dimensions||41.8mm x 36.8mm x 16.9mm|
QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.
We Also Recommend