LiveHouse MySensors Ethernet Gateway
The LiveHouse Mysensors Ethernet Gateway is a ready to run gateway for use with MySensors.org open source hardware projects.
Based on Arduino UNO with an amplified nRF24L01+ radio and WizNet 5100 Ethernet, pre-assembled, pre-tested and pre-loaded with a Gateway Sketch.
Enclosed in an Aluminium case to shield from RF interference, this provides a quick, reliable solution to interfacing with your home automation controller letting you spend your time on building sensors and IoT devices.
In the Box:
- LiveHouse Ethernet Gateway with external RF Antenna
- 12V DC Adaptor
Designed and Assembled in Western Australia by LiveHouse Automation, based on Open Source Hardware and Software components.
If mounting the Gateway inside a metal box, you may need to mount the Antenna externally. We have an antenna extension cable available specifically for this purpose.
| Technical Specifications |
| RF Protocol | nRF24L01+ with MySensors v2.x |
| RF Frequency | Worldwide 2.4GHz ISM Band |
| Application | Indoor use only, for outdoor use watertight plastic box |
| Power | 12V DC Power Adaptor |
| Operation Range | Up to 30m without obstacles |
| Enclosure | Aluminium |
| Operating Voltage | 220 - 250 VAC |
| Operating Temp. | -0C ~ +40C |
| Dimensions | 100mm x 97mm x 40mm |
LiveHouse tests and supports Vera Controllers for use with the Ethernet Gateway, however MySensors plugins are available for many automation controllers:
- Ago Control
- Calaos
- Domoticz
- DomotiGa
- FHEM
- Freedomotic
- Home Assistant
- HomeGenie
- Homeseer
- Homey
- HoMIDoM
- Indigo Domotics
- ioBroker
- Jeedom
- MajorDoMo
- Misterhouse
- MyController.org
- MyNodes.NET
- OpenHAB
- openLuup
- PiDome
- pimatic
- Vera
- XTension
LiveHouse Automation supports Open Source projects. A portion of the proceeds from each MySensors enabled device is contributed to the MySensors.org project.
The following Open Source Components and any code/hardware designs are released under the same licence as the components on which they are based.
- Arduino Core Libraries - Lesser GNU Public License
- Arduino Hardware - Creative Commons Attribution-ShareAlike License
- MySensors Library - GNU General Public Licence v2
For information on GNU Licences, refer to http://www.gnu.org/licenses/
For information on Creative Commons Licences, refer to https://creativecommons.org/licenses/
The Source Code for LiveHouse Ethernet Gateway is available on request and released under the GNU General Public Licence v3. Alternately, use the standard MySensors Gateway Sketches.
QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.
We Also Recommend
