Menu
Cart 0
VISION Z-Wave Tilt Sensor

VISION Z-Wave Tilt Sensor

Vision

  • $7400


Product Details

The VISION Garage Door Tilt Sensor is designed to be fitted to any object which can trigger a change in position from vertical to horizontal and back again. Possible use cases include:

  • Attached to a panel/tilt garage door to detect when it is opened and closed
  • Attached to a letter box door to send an alert when mail is delivered
  • Attached to the back of a home theatre chair to dim the lights when reclined
  • Attached to the boot of a car to trigger an event when it is opened or closed
  • Attached to a tilt style window frame to trigger an alarm if opened by an intruder

This VISION Garage Door Tilt Sensor is powered by a single lithium CR123A battery which can last 3-5 years under normal conditions. A visual (LED) warning and Z-Wave notification event will be sent to the controller or any associated Z-Wave device when the battery needs to be replaced. Its small size makes it ideal for a wide variety of uses and for maximum integration possibilities.

The device also features two additional terminals allowing you to connect an external dry contact which operates in parallel to its tilt sensing. You can add external switch or any binary sensor, such as door/window sensor. The sensor has two normally closed contact terminals, which can be used for external switch wired contacts. When triggered, the external switch will send an Alarm Report.

To install an external sensor/switch, loosen the two screws shown below (1). Next, insert the leads from external switch through the hole in the side of the enclosure (2). Finally, tighten the two screws (1) to secure leads.

This device can easily be fitted to any door, window or other item using screws or double sided tape (included).

Integrates with all Australian certified (921.42MHz) Z-Wave controllers including:

  • Vera 3
  • Vera Lite
  • Fibaro Home Center 2
RF Protocol Z‐Wave (Mulitlevel Command Class)
RF Frequency 921.42Mhz ‐ AU/NZ  approved RF for Z‐wave
Operating Voltage 1 x CR123A Battery
Status Indicator LED Light
Operation Range Up to 30m without obstacles
Application Indoor
Operation temperature -10 ~ 50 °C
Storage temperature ‐10 ~ 70 °C, humidity 5 ~ 95% RH (max)
Weight 110g
Housing ABS
Dimensions (HxWxD) 75 mm x 42mm x 26mm
Compliance Certified for USA, EU and AU/NZ markets (FCC, CE, ROHS, C-TICK)

 

Questions & Answers

Have a Question?

Be the first to ask a question about this.

Ask a Question

We Also Recommend